1. The product is manufactured in accordance with the European Specification CE EN345-S1. There is opinion that this specification is as good as or better than the local SABS criteria for testing Safety footwear. The SABS in all likelihood may within 24 months adopt the EN spec as the updated SABS version. All testing is conducted by SATRA a recognised European testing house based in the UK.



2. The product is manufactured in an ISO9001:2000 accredited factory, number 15/03Q10011R00 valid until November 2009 and approved for the design, manufacture and service of Safety footwear, casual shoes and sport shoes.



3. The factory manufactures 500 000 pairs of shoes or boots per month of which approximately 350 000 pairs per month are sold into the European market.



4. Double density Poly-urethane soles. The soles feature an ultra comfortable mid-sole and a highly durable Maxi-grip outer sole ensuring good lifespan. Double density also prevents common problems evident in single density products like splitting of the sole or the comfort and durability balance. (i.e. the product is durable but not comfortable or comfortable but too soft to be durable).



5. The soles have been tested to 30 000 flexes before showing any sign of wear. This equates to 30 000 steps per sole and meets the EN 345-S1 specification.



6. The sole is slip resistant tested by SATRA to PM144 1992. All soles are designed to disperse fluids to facilitate grip.



7. Each shoe is fully lined with an inner sole from heel to toe. This feature is not available in locally produced equivalent products. This inner sole does not compromise the antistatic properties of the shoe.



8. The toe cap is manufactured by Esjot Goldenberg, part of the TEXON group of companies which is the world’s largest shoe materials and components manufacturer.



9. Boxes are of sturdy construction and feature pictures of the product in the box on each end to ensure that correct product is selected or counted at stock take. The products are also colour differentiated to indicate the different styles.



10. Each pair of shoes or boots is supplied with a lace tag to market the rest of the range and build brand identity.



11. All products feature quick release eyelets and bellows tongue.



12. All products are generously sized, facilitating a good fit. It is not unusual to experience the sensation of not being able to feel the steel toe cap.

Please take a little time to care for your footwear. It will add to the lifespan of the footwear you have purchased, should ensure that the maximum comfort level is maintained and that hygienically, your shoes or boots do not contribute to health problems.

• Try to avoid scuffing the upper leather or treading on sharp edges that cut or tear the sole.
  
  
• Clean your shoes regularly.
  
  
• Remove excess dirt and mud, wipe clean with a damp cloth.
  
  
• Always allow to dry thoroughly. Never force drying as this will cause the leather to crack and distort.
  
  
• Grain leather uppers should have wax polish applied regularly. Alternatively apply a shoe cream.
  
  
• Rub Suede or Nubuck uppers with a stiff bristled brush.
  
  
• Soles should be checked regularly and stones and metal shavings removed from cleats.
  
  
• Replace laces if they become worn.